$ uv run tools/flow.py test cases/lab03-challenge2.json -v
✔ before: POST http://localhost:8800/tickets-reset · HTTP 200 · 0.0s · {"cleared": 2}
    → request  POST http://localhost:8800/tickets-reset
      {}
    ← response HTTP 200
      {
        "cleared": 2
      }
✔ before: POST http://localhost:8800/dlq-clear · HTTP 200 · 0.0s · {"cleared": 0}
    → request  POST http://localhost:8800/dlq-clear
      {}
    ← response HTTP 200
      {
        "cleared": 0
      }
✔ before: POST http://localhost:8800/alerts-clear · HTTP 200 · 0.0s · {"cleared": 1}
    → request  POST http://localhost:8800/alerts-clear
      {}
    ← response HTTP 200
      {
        "cleared": 1
      }
✔ before: POST http://localhost:8800/admin/fault · HTTP 200 · 0.0s · {"faq": "ok", "tickets": "ok", "prompts": "ok", "usage": "ok", "dlq": "ok", "slow_seconds": 8}
    → request  POST http://localhost:8800/admin/fault
      {
        "faq": "ok",
        "tickets": "ok",
        "prompts": "ok",
        "usage": "ok",
        "dlq": "ok"
      }
    ← response HTTP 200
      {
        "faq": "ok",
        "tickets": "ok",
        "prompts": "ok",
        "usage": "ok",
        "dlq": "ok",
        "slow_seconds": 8
      }
POST http://localhost:5678/webhook/my-ops-status · 7 case(s) × 1
✘ 1 · 아무 일 없음 → ok · 0.0s · status 404 (expected 200); status = null (expected ok); dlq = null (expected 0)
    → request  POST /webhook/my-ops-status
      {}
    ← response HTTP 404
      {
        "code": 404,
        "message": "The requested webhook \"POST my-ops-status\" is not registered.",
        "hint": "The workflow must be active for a production URL to run successfully. You can activate the workflow using the toggle in the top-right of the editor. Note that unlike test URL calls, production URL calls aren't shown on the canvas (only in the executions list)"
      }
✔ before: POST http://localhost:8800/admin/fault · HTTP 200 · 0.0s · {"faq": "ok", "tickets": "error", "prompts": "ok", "usage": "ok", "dlq": "ok", "slow_seconds": 8}
    → request  POST http://localhost:8800/admin/fault
      {
        "tickets": "error"
      }
    ← response HTTP 200
      {
        "faq": "ok",
        "tickets": "error",
        "prompts": "ok",
        "usage": "ok",
        "dlq": "ok",
        "slow_seconds": 8
      }
✔ 2 · (접수 실패 2건) · 2.9s
    → request  POST /webhook/my-intake
      {
        "requests": [
          {
            "id": "R-301",
            "user": "정우성",
            "text": "사내 위키 로그인이 안 돼요"
          },
          {
            "id": "R-302",
            "user": "이준호",
            "text": "노트북 배터리가 금방 닳아요"
          }
        ]
      }
    ← response HTTP 200
      {
        "total": 2,
        "created": 0,
        "failed": 2,
        "rejected": 0,
        "duplicates": 0,
        "unclassified": 0,
        "results": [
          {
            "id": "R-301",
            "status": "failed",
            "reason": "500 - \"{\\\"error\\\": \\\"tickets service is failing (fault switch)\\\"}\""
          },
          {
            "id": "R-302",
            "status": "failed",
            "reason": "500 - \"{\\\"error\\\": \\\"tickets service is failing (fault switch)\\\"}\""
          }
        ],
        "dlq_saved": true,
        "alert": "sent"
      }
✔ after: POST http://localhost:8800/admin/fault · HTTP 200 · 0.0s · {"faq": "ok", "tickets": "ok", "prompts": "ok", "usage": "ok", "dlq": "ok", "slow_seconds": 8}
    → request  POST http://localhost:8800/admin/fault
      {
        "faq": "ok",
        "tickets": "ok",
        "prompts": "ok",
        "usage": "ok",
        "dlq": "ok"
      }
    ← response HTTP 200
      {
        "faq": "ok",
        "tickets": "ok",
        "prompts": "ok",
        "usage": "ok",
        "dlq": "ok",
        "slow_seconds": 8
      }
✘ 3 · DLQ가 있으면 warn · 0.0s · status 404 (expected 200); status = null (expected warn); dlq = null (expected 2); reasons has none of ['재처리']
    → request  POST /webhook/my-ops-status
      {}
    ← response HTTP 404
      {
        "code": 404,
        "message": "The requested webhook \"POST my-ops-status\" is not registered.",
        "hint": "The workflow must be active for a production URL to run successfully. You can activate the workflow using the toggle in the top-right of the editor. Note that unlike test URL calls, production URL calls aren't shown on the canvas (only in the executions list)"
      }
✔ 4 · (보고서 버그) · 0.0s
    → request  POST /webhook/nightly-report
      {}
    ← response HTTP 500
      {
        "message": "Error in workflow"
      }
… before: wait 3s
✘ 5 · critical 알림이 있으면 critical · 0.0s · status 404 (expected 200); status = null (expected critical); alerts.critical = null (expected 1)
    → request  POST /webhook/my-ops-status
      {}
    ← response HTTP 404
      {
        "code": 404,
        "message": "The requested webhook \"POST my-ops-status\" is not registered.",
        "hint": "The workflow must be active for a production URL to run successfully. You can activate the workflow using the toggle in the top-right of the editor. Note that unlike test URL calls, production URL calls aren't shown on the canvas (only in the executions list)"
      }
✔ 6 · (재처리 · 알림 확인 뒤 비움) · 1.1s
    → request  POST /webhook/my-replay
      {}
    ← response HTTP 200
      {
        "replayed": 2,
        "ok": 2,
        "still_failed": 0,
        "parked": 0,
        "duplicates": 0
      }
✔ after: POST http://localhost:8800/alerts-clear · HTTP 200 · 0.0s · {"cleared": 2}
    → request  POST http://localhost:8800/alerts-clear
      {}
    ← response HTTP 200
      {
        "cleared": 2
      }
✘ 7 · 고친 뒤 → ok · 0.0s · status 404 (expected 200); status = null (expected ok); dlq = null (expected 0); created = null (expected 2)
    → request  POST /webhook/my-ops-status
      {}
    ← response HTTP 404
      {
        "code": 404,
        "message": "The requested webhook \"POST my-ops-status\" is not registered.",
        "hint": "The workflow must be active for a production URL to run successfully. You can activate the workflow using the toggle in the top-right of the editor. Note that unlike test URL calls, production URL calls aren't shown on the canvas (only in the executions list)"
      }
Passed 3/7
report: runs/lab03-challenge2-20261029-141901.json
✔ after: POST http://localhost:8800/admin/fault · HTTP 200 · 0.0s · {"faq": "ok", "tickets": "ok", "prompts": "ok", "usage": "ok", "dlq": "ok", "slow_seconds": 8}
    → request  POST http://localhost:8800/admin/fault
      {
        "faq": "ok",
        "tickets": "ok",
        "prompts": "ok",
        "usage": "ok",
        "dlq": "ok"
      }
    ← response HTTP 200
      {
        "faq": "ok",
        "tickets": "ok",
        "prompts": "ok",
        "usage": "ok",
        "dlq": "ok",
        "slow_seconds": 8
      }
